This is the COMPLETE full service workshop repair manual printed for the Audi A3. Production model years 2004. All styles coverered. Hundreds of pages allow you to print it out in its entirety or just the pages you need!! These Audi A3 2004 Workshop Manual are your number one source for repair and servic e information. This is specifically written for the do-it-yourselfer as well as the experienced mechanic. Using this Audi A3 2004 Workshop Manual is an inexpensive way to keep you vehicle working properly. This Audi A3 2004 Workshop Manual provides step-by-step instructions based on the complete disassembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure.
This Audi A3 2004 Workshop Manual Contents :
• Servicing injection system • General notes on self-diagnosis • Safety precautions • Rules for cleanliness • Procedure to be followed prior to opening high-pressure injection system • Technical data • Overview – fitting locations • Exploded view – intake manifold • Exploded view – fuel rail • Exploded view – air cleaner / engine cover panel • Removing and installing engine cover panel with air filter element • Removing and installing intake manifold with fuel rail • Removing and installing injectors • Checking initial fuel pressure (up to high-pressure pump) • Checking fuel pressure and residual pressure (up to high-pressure pump) • Exploded view – high-pressure fuel pump • Removing and installing high-pressure fuel pump • Wiring and component check with test box V.A.G 1598/42 • Renewing Motronic control unit J220 • Removing and installing Lambda probe G39 and Lambda probe heater Z19 before catalytic converter • Removing and installing Lambda probe after catalytic converter G130 and Lambda probe 1 heater, after catalytic converter Z29 • Checking ignition system • General notes on ignition system • Safety precautions • Technical data for ignition system • Ignition system – exploded view of components • Removing and installing ignition coils with output stages