These installation instructions are only valid for cars with SA555 high on-board computer. Technical and electrical knowledge required. The installation time approx. 7 hours, which may vary depending on the condition of the car and equipment in it. This BMW 7 Series (E38) Retrofit Kit Installation Istructions contents : Preparation – Parts List – Conection diagram – Installation and cabling diagram for the on-board monitor wiring harness – Installation and cabling diagram of the supplementary wiring harness for the navigation system – To install the on-board monitor wiring harness, on-board monitor and on-board monitor radio – To install the supplementary wiring harness for navigation systems in cars with a production date prior to 9/98 – To choose installation of the supplementary wiring harness for navigation system in cars from production date 9/98 – To install the supplementary wiring harness for navigation systems in cars with production date after 9/98 – To install the navigation system – Coding and concluding – Connection description for TV function – Circuit diagram for the on-board monitor wiring harness – Circuit diagram for the navigation system wiring harness – Circuit diagram for the navigation system supplementary wiring harness.
BMW 7 Series (E38) Retrofit Kit Installation Istructions tools and equipment required :
MoDIC III or DIS, 1/4 inch socket set, Set of Philips screwdrivers, Cable lamp, Angle cutter, Silicone, Hot air blower, Set of Torx sockets, Set of flat screwdriver, Universal knife, Set of Philips screwdriver -short.