Inspired by aircraft technology, the Oilbud™ is built from aircraft quality materials, polished stainless steel tubing, braided stainless hoses and 6061-T6 aluminum extrusion and welded in header tank assembly. The temperature regulator starts to open when oil temps hit 185 degrees and fully opens at 205 degrees. Temperature differentials from the cold to the hot [...]

This is INSTALLATION INSTRUCTIONS of the Vance & Hines Fuelpak Fuel Management System for fuel injected Harley-Davidson® motorcycles. Please take the time to read the entire instruction manual before attempting to install. SUMMARY: The Vance & Hines Fuelpak requires the use of a high performance Air Filter. The Fuelpak will be installed between the factory [...]

Harley Davidson Wiring
Softails and Fat Boys require a longer compressor wire. The negative wire from the compressor will mount underneath the seat to the main negative ground wire bolt. The positive wire of the compressor will route to same area and connect to relay. Connect both black wires from the relay to the original [...]

Installation Manual For Harley Davidson FL series Includes Electra Glide, Ultra Classic, Road King, Road Glide . These instructions will guide you through the installation of your new Ghost Wheels™ kit onto your Harley Davidson as it was manufactured, and does not consider any modification that may have been made that could interfere with these [...]

Mounting The original ignition module may be removed or left in place. If it is left on the bike, disconnect all of the connections to avoid interference with the MSD Pulse. The MSD Pulse Ignition can be mounted in any position as long as it is kept away from direct engine heat sources.
The MSD Pulse [...]