Jeep JK 2&4 Door Body Lift Installation Instructions. The document below is installation instructions of Jeep JK 2&4 door body lift. Attempts to install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle. The installation instruction came with picture to give you more understanding about door body lift installation. In the document also contains about rear bumer bracket installation instructions and Shifter installation instructions for manual shift JK.
INSTALLATION INSTRUCTIONS FOR JEEP JK 2 AND 4 DOOR BODY LIFT :

1. Place Jeep on clean, dry, level surface. Installation is done one side at a time.
2. Raise hood. Using a Phillips screw driver, remove the (6) push pin inserts from grill on top side as shown. Retain for re-use.
3. Pull grill toward you to release the three lower clips.
4. Disconnect the parking light electrical connecter and remove grill assembly.
5. Using a 16mm wrench remove the 2 stud nuts from the stock body mounts as shown (12 mounts for 4 door and 8 mounts for 2 door), removing only the passenger side first.
6. …..

Download PDF Jeep JK 2&4 Door Body Lift Installation Instructions