Motorcycle Security Universal Wiring Harness Installation.

• BEFORE INSTALLING, be sure to disconnect the (–) negative terminal of the vehicle battery. This will eliminate the possibility of accidental electrical shorts and/or unnecessary battery drain.
• Read the 866F Owner’s Guide along with this Installation Guide.
• Be sure to cover your wiring so it has a factory appearance, and always keep your connections protected from the outside elements.
• Splice Connectors (not included) may be used; however, we recommend that you use solder to ensure a permanent connection.
• You will need to supply your own voltmeter (analog or digital) and wire strippers to complete this installation. You may also need electrical tape and/or corrugate tubing to cover your wiring in a professional manner. Battery-post taps/clamps/extensions may also aid your installation.
• Two wiring harness variations have shipped with CYCLONE. Only one of these types was included with your system: all-black harness or colored harness. The all-black wire harness will have color name tags at the end of each wire that correspond to the wire colors mentioned in this manual. It is important to re-confirm your connections with the all-black harness before you cut off the color name tags; otherwise, you will not easily be able to determine the function of each wire. The information given on page 4 of this guide will help you trace wires should you cut off the wire color tags by accident.

Download PDF Motorcycle Security Universal Wiring Harness Installation